Torque Specifications-Manual Transaxles

Air Cleaner Box-to-Battery Tray Bolts 10 Nm (89 inch lbs.)
Air Cleaner Box-to-Frame Rail Bolt 10 Nm (89 inch lbs.)
Back-Up Light Switch-to-Shift Control Housing Assembly 38 Nm (28 ft. lbs.)
Battery Hold Down-to-Battery Tray Bolt & Nut 9 Nm (80 inch lbs.)
Battery Hold Down-to-Frame Rail Bolt 9 Nm (80 inch lbs.)
Battery Terminal-to-Battery Bolt 17 Nm (150 inch lbs.)
IMPORTANT: Attach positive, then negative terminal.
Battery Tray-to-Side of Frame Rail Bolts 10 Nm (89 inch lbs.)
Battery Tray-to-Top of Frame Rail Bolts 10 Nm (89 inch lbs.)
Brake Master Cylinder-to-Brake Booster Nuts 27 Nm (20 ft. lbs.)
Case-to-Clutch Housing Bolts 28 Nm (21 ft. lbs.)
IMPORTANT: Refer to Specifications for torque Sequence.
Case-to-Clutch Housing Studs 28 Nm (21 ft. lbs.)
IMPORTANT: Refer to Specifications for torque Sequence.
Catalytic Converter-to-Intermediate Exhaust Pipe Bolt & Nut 25 Nm (18 ft. lbs.)
Clutch Fork Ball Stud 24 Nm (18 ft. lbs.)
Clutch Housing Cover Assembly to Flywheel Bolts 25 Nm (18 ft. lbs.)
Clutch Hydraulic Damper Bracket-to-Case Studs 25 Nm (18 ft. lbs.)
Clutch Pedal Pivot Shaft Attachment Nut 17 Nm (150 inch lbs.)
Clutch Start Switch Attachments Nuts 10 Nm (89 inch lbs.)
Cradle-to-Body Bolts 210 Nm (155 ft. lbs.)
Dust Cover-to-Clutch Housing Bolts 11 Nm (97 inch lbs.)
End Cover-to-Case Bolts 12 Nm (106 inch lbs.)
IMPORTANT: Refer to Specifications for torque sequence.
Engine to Transaxle Stiffening Brace 54 Nm (40 ft. lbs.)
Engine Strut Bracket-to-Cradle Nuts 50 Nm (37 ft. lbs.)
Flywheel-to-Crankshaft Bolts 80 Nm (59 ft. lbs.)
Front Brake Hose Bracket-to-Inner Fender Bolt 5 Nm (44 inch lbs.)
Front Exhaust Pipe Hanger Strap Clamp 60 Nm (44 ft. lbs.)
Front Exhaust Pipe Hanger-to-Powertrain Stiffening Bracket Bolts 30 Nm (22 ft. lbs.)
Front Lower Control Arm Ball Stud-to-Steering Knuckle Nut 75 Nm (55 ft. lbs.)
IMPORTANT: Align slot in nut to cotter pin hole.
Input Shaft Clamp Nut 150 Nm (111 ft. lbs.)
IMPORTANT: Always use a new nut.
Intake Manifold Support Bracket-to-Intake Manifold Bolt - LL0 30 Nm (22 ft. lbs.)
Intake Manifold Support Bracket-to-Intermediate Shaft Support Bracket Nut - LL0 54 Nm (40 ft. lbs.)
Intermediate Shaft Support Bracket-to-Engine Bolts 54 Nm (40 ft. lbs.)
Intermediate Shaft Support Bracket-to-Engine Stud 54 Nm (40 ft. lbs.)
Output Shaft Clamp Nut 150 Nm (111 ft. lbs.)
IMPORTANT: Always use a new nut.
Park/Neutral Position and Back-Up Light Switch-to-Case Bolts 14 Nm (124 inch lbs.)
Reverse Shift Lever Assembly-to-Clutch Housing 14 Nm (124 inch lbs.)
IMPORTANT: Apply Loctite 242 Threadlocker (or equivalent).
Sensor - Vehicle Speed Sensor-to-Clutch Housing 26 Nm (19 ft. lbs.)
Shift Cable Pass-Through Grommet Nuts 6 Nm (53 inch lbs.)
Shift Control Housing Assembly-to-Case Bolts 28 Nm (21 ft. lbs.)
Shifter Control Assembly to Floorpan Nuts 25 Nm (18 ft. lbs.)
Steering Gear-to-Cradle Bolt & Nut 50 Nm (37 ft. lbs.)
Steering Linkage Outer Tie Rod-to-Steering Knuckle Nut 45 Nm (33 ft. lbs.)
IMPORTANT: Align slot in nut to cotter pin hole.
Transaxle Drain Plug 30 Nm (22 ft. lbs.)
Transaxle-to-Engine Bolts 140 Nm (103 ft. lbs.)
Transaxle-to-Engine Studs 100 Nm (74 ft. lbs.)
Transaxle Mount-to-Case Bolts 32 Nm (24 ft. lbs.)
Transaxle Mount-to-Cradle Nut 50 Nm (37 ft. lbs.)
Transaxle Strut, Transaxle Bracket-to-Case Bolts 54 Nm (40 ft. lbs.)
Transaxle Strut-to-Midrail Bracket Bolt 50 Nm (37 ft. lbs.)
Transaxle Strut-to-Transaxle Bracket Bolt 70 Nm (52 ft. lbs.)
Wheel Lug Nuts 140 Nm (103 ft. lbs.)