Service Specifications
Output Ou| Transaxle Pump | Drive Gear Clearance (Std.) | 0.012-0.041 mm (0.0004-0.0016 in) |
| Driven Gear Clearance (Std.) | 0.012-0.041 mm (0.0004-0.0016 in) | |
| Driven Gear to Pump Housing Clearance (Std.) | 0.064-0.139 mm (0.0025-0.0055 in) | |
| Driven Gear to Crescent Clearance (Std.) | 0.191-0.341 mm (0.0075-0.0134 in) | |
| Drive Gear to Crescent Clearance (Std.) | 0.128-0.278 mm (0.0050-0.0109 in) | |
| Torque Converter | End Play (Std.) | 0.00-0.60 mm (0.000-0.026 in) |
| Input Shaft | Clearance Between 1st Drive Gear and Input Shaft Bearing (Std.) | 0.075-0.425 mm (0.003-0.017 in) |
| Clearance Betwwen 2nd/Rev. Drive Gear and 2nd/Rev. Thrust Bearing (Std.) | 0.032-0.144 mm (0.0.001-0.006 in) | |
| Clearance Between 4th Drive Gear and 3/4 Drive Gear Thrust Bearing (Std.) | 0.057-0.219 mm (0.002-0.009 in) | |
| Output Shaft | Clearance Between 4th Driven Gear and 3/4 Thrust Bearing (Max.) | 0.464 mm (0.018 in) Minimum: The gear must rotate freely on the shaft. |
| Clearance Between 2nd Driven Gear and Dog Clutch Hub (Std.) | 0.050-0.150 mm (0.002-0.006 in) | |
| Clearance Between Reverse Driven Gear and Reverse Driven Gear Thrust Washer (Std.) | 0.066-0.172 mm (0.003-0.007 in) Minimum: The gear must rotate freely on the shaft. | |
| Clearance Between 1st Driven Gear Washer and 1st Driven Gear (Std.) | 0.100-0.400 mm (0.004-0.016 in) | |
| 1st Clutch | End Play | 0.960-1.410 mm (0.038-0.055 in) |
| 2nd Clutch | End Play | 1.520-2.190 mm (0.060-0.086 in) |
| 3rd Clutch | End Play | 1.170-1.560 mm (0.046-0.061 in) |
| 4th Clutch | End Play | 0.910-1.180 mm (0.036-0.046 in) |