Drive Shaft Seal, Right-Hand

Drive shaft seal, right-hand

Changing in car

To remove

1. Remove the intermediate shaft. See Intermediate shaft or Intermediate shaft, Z19.
2. Remove the seal using a large screwdriver.

Note
Take care not to scratch the hole in the gearbox for the drive shaft seal.





To fit

1. Knock in place the new seal using
Man: 87 92 657 Fitting drift, drive shaft seals.
Aut 6-speed: 32 025 025 Fitting drift, drive shaft seal





2. Fit the intermediate shaft. See Intermediate shaft or Intermediate shaft, Z19.