SPA control module (630), 5D

SPA control module (630), 5D

To remove
Carry out actions before removing control module.

1. Open left-hand side hatch in luggage compartment.

IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins.

2. Unplug the control module connector.





3. Remove the SPA control module by releasing the clip.
4. Remove the holder from the SPA control module.





To fit

1. Fit the holder to the SPA control module.





2. Fit the SPA control module.

IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.





3. Plug in the control module connector.
4. Fit the left-hand side hatch in the luggage compartment.

Carry out actions after replacement of control module.