CV

Radio Receiver, TMC, CV

To remove
1. Carry out procedures when replacing electronic components.
2. Remove right-hand rear side trim.

IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins.

3. Unplug the connectors for the radio receiver.
4. Remove the radio receiver.

To fit
1. Fit the radio receiver.
2. Plug in the connectors for the radio receiver.

IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.

3. Fit right-hand rear side trim.