Power Supply

Power Supply

IMPORTANT: Turn the key to LOCK or remove it whenever the car is not being used. In OFF position, the battery will discharge within a couple of hours.

The vehicle power supply system is divided into:

BAT+ A non-fused battery connection
+30 A fused battery connection
+15 A connection that is supplied voltage when the ignition key is position ON or START
+54 A connection that is supplied voltage when the ignition key is in the ON position.
+B A connection that is supplied voltage when the key is inserted in the ignition switch and has been turned to its first position.
+X A connection that is supplied voltage when the ignition key is inserted in the ignition switch. Only used for T8 and TCS/ESP.