Description of Read Values
Description of Read ValuesAll values are reset and their measurement starts following activation of "Express up".
Max. force - Max. clamping force
Shows max. measured force during the latest closing cycle.
Purpose: To identify deviating slowness in the system.
Position of max. force (mm) - Max. clamping force position (mm)
Shows the position, in mm from bottom position, of max. measured force during the latest closing cycle.
Purpose: To show where fault diagnosis of the mechanical system should be focused.
Average force - Average clamping force value
Average value of the force in the latest closing cycle.
Purpose: To indicate how slow the system is, comparable with Max. force.
Force difference - Clamping force difference
Difference between Max. force and Average force.
Purpose: To identify mechanical variations.
Force difference first 20 mm - Clamping force difference first 20 mm
Description: Measures the difference of min./max. torque during the first 20 mm following activation.
Purpose: To detect whether the window is unsteady during the change of direction, so called "drawer effect".