Engine Bay Electrical Centre 342 (UEC)

Underhood Electrical Centre (UEC)

To remove
1. Remove the battery cover.







2. Disconnect the negative battery cable.
3. Remove the main fuse box cover.







4. Remove the retaining bolts of the main fuse box.
5. Remove the retaining bolts of the connectors.
6. Remove the nut of the positive cable connection and cut off the cable tie.
7. Detach the main fuse box from the connectors by pressing down on the connector screws.
8. Lift out the main fuse box.

To fit
1. Position the connectors in their holders.







2. Press the main fuse box into the connectors.







3. Fit the positive cable connection and secure it with a cable tie.
4. Fit the connector retaining bolts.
5. Fit the main fuse box retaining bolts.
6. Fit the main fuse box cover.
7. Connect the negative cable of the battery.







8. Fit the battery cover.
9. Reset the car; see Procedure after battery disconnection.