Weatherstrip, Luggage Compartment Opening 5D

Weatherstrip, Luggage Compartment Opening 5D

To remove

1. Open the tailgate.
2. Fold up the luggage compartment floor.
3. Remove Scuff plate, luggage compartment, 5D.
4. Remove the rubber moulding (A) by pulling the weatherstrip straight out.





To fit

1. Fit the weatherstrip (A). Use a rubber hammer so that the weatherstrip is properly located.





2. Fit Scuff plate, luggage compartment, 5D.
3. Lower the luggage compartment floor.
4. Shut the tail gate.