Heating Pad, Front Seat Cushion

Heating Pad, Front Seat Cushion

To remove

1. Remove the seat.
2. Remove front seat cushion.
3. Remove the seat cushion upholstery.

To fit

WARNING: Cars with PPS: There must be no more than two attached heating pads. If there are already two, the foam cushion with corresponding PPS components must be replaced. Otherwise there is a risk that the PPS/airbag system will not operate properly, which could lead to sever personal injury.

1. Cars with PPS: Check the number of heating pads.
Tape the new heating pad on top of the old one. Use double-sided adhesive tape. Plug in the heating pad connector.







2. Fit the seat cushion upholstery.
3. Fit front seat cushion.
4. Fit the seat.