B1001 42 - 02

B1001 42

Control Module not Added







Fault symptom
- Parking assistance not working.
- Messages shown in SID.

On-board diagnosis

Type of diagnosis:
- Continuous

Enable criteria:
- Diagnostics run when ignition is ON.

Fault criteria:
- Control module not configured.

System reaction to a fault:
- Parking assistance is switched off.

Diagnostic help
- Control module was not added.
- See "After fitting a control module" under fault diagnosis, general.

Diagnostic help

Diagnosis regards:
- To locate electrical faults in the control module internal electronics.

Functions in the diagnostic tool related to the fault:
- See menu "All - Add/Remove"