Side Airbag Module

Side Airbag Module

Check for the following, and replace damaged parts with new parts.
- Front seat, airbag module and mounting bracket are damaged or deformed.
- Harness and/or connector is cracked, deformed or open. Lead wire is exposed.

Inspection

IMPORTANT: Before working on the airbag module, refer to the "CAUTION" in Airbag Systems/Service Precautions.

Perform the inspection of following items, and replace the damaged parts with new ones.

With side clash (when side airbag is deployed)
- Side airbag module assembly
- Backrest pad assembly
- Backrest frame assembly
- Backrest cover assembly

Other replacement parts, which found to be damaged by visual check
- Headrest assembly
- Bush
- Slide rail OUT
- Slide rail IN
- Seat hinge cover
- Seat lifter lever
- Reclining lever
- Side airbag harness and connector (body side)

With side clash (when side airbag is not deployed)
Check the seat and airbag module visually, and then replace them with new ones if damaged or cracked.
Specially inspect the damage of airbag module body, installing bracket, harness connector.
Without side clash (dirt and damage of cover)
Replace the corresponding part with a new one.