Driver's Airbag Module

Inspection
If the vehicle is involved in a collision, even if it is a slight collision, be sure to check the following system parts.

IMPORTANT: Refer to "CAUTION" in Service Precautions before handing the airbag module.

Driver's Airbag Module
Check for the following, and replace damaged parts with new parts.
- Airbag module is cracked or deformed.
- Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
- The module surface is fouled with grease, oil, water or cleaning solvent.

When installing a new driver's airbag module, check the following, and replace the damaged parts with new ones.
- The steering wheel is in the way, making it difficult to install the airbag module.
- The clearance between the driver's airbag module and steering wheel is not constant.
- The steering wheel deformation in axial and radial directions exceed limits.

Specifications:
Height deflection A: Less than 6 mm (0.24 in)
O.D. deflection L: Less than 17 mm (0.67 in)