With Manufacturer's Scan Tool

Clear Memory Mode

OPERATION

MANUFACTURER'S SCAN TOOL (NORMAL MODE)
On Main Menu display screen, select the {2. Each System Check}.
On System Selection Menu display screen, select the {Engine Control System}.
Select the {OK} after the information of engine type is displayed.
On Engine Diagnosis display screen, select the {Clear Memory}.
When the 'Done' and 'Turn' Ignition Switch OFF' are shown on the display screen, turn the ignition switch to OFF, and then turn the Manufacturer's scan tool to OFF.

NOTE: For detailed operation procedure, refer to MANUFACTURER'S SCAN TOOL OPERATION MANUAL.

MANUFACTURER'S SCAN TOOL (OBD MODE)
On Main Menu display screen, select the {2. Each System Check}.
On System Selection Menu display screen, select the {Engine Control System}.
Select the {OK} after the information of engine type is displayed.
On Engine Diagnosis display screen, select the {OBD System}.
On OBD Menu display screen, select the {4. Diagnosis Code(s) Cleared}.
After the 'Clear Diagnostic Code?' is shown on the display screen, select the {OK}.
Turn the ignition switch to OFF, and then turn the Manufacturer's scan tool to OFF.

NOTE: For detailed operation procedure, refer to MANUFACTURER'S SCAN TOOL OPERATION MANUAL.