Timing Cover: Service and Repair

Timing Belt Cover

Removal
1. Remove the V-belt.
2. Remove the crank pulley.
3. Remove the timing belt cover (LH) (A).
4. Remove the timing belt cover (RH) (B).
5. Remove the front timing belt cover (C).





Installation
1. Install the front timing belt cover (c).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
2. Install the timing belt cover (RH) (B).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
3. Install the timing belt cover (LH) (A).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)





4. Install the crank pulley.
5. Install the V-belt.

Inspection
1. Make sure the cover is not damaged.