Parking Brake Lever: Adjustments
ADJUSTMENTRemove the console cover.
Forcibly pull the parking brake lever 3 to 5 times.
Adjust the parking brake lever by turning adjuster until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lbs.).
Tighten the lock nut.
Lever stroke: 7 to 8 notches when pulled with a force of 196 N (20 kgf, 44 lbs.)
Tightening torque (Lock nut): 6 Nm (0.6 kgf-m, 4.4 ft. lbs.)
(1) Parking brake lever
(2) Lock nut
(3) Adjusting nut
Install the console cover.