Antenna Amplifier (4D)

Antenna Amplifier (4D)

To remove







1. Remove the speaker grille on the right-hand side of the parcel shelf.
2. Remove the sealing strip.
3. Remove the trim on the right-hand C pillar to gain access to the antenna amplifier.
4. Undo all connections to the antenna amplifier.







5. Remove the screws holding the antenna amplifier and remove the unit.

IMPORTANT: Be careful with the contact (4). When undoing the Fuba GO-NOGO HF contact, care is required to ensure that it is done correctly without damaging the connection. See the instructions (4).

To fit
Fit in reverse order.