Electric Motor For Sunroof (Without Pinch Protection)

Electric Motor For Sunroof (without Pinch Protection)

NOTE: If the sunroof motor is malfunctioning, the hatch can be operated manually with a screwdriver.

To remove
1. Remove the headlining.

IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins.

2. Remove the connector from the sunroof's electric motor.







3. Remove the sunroof motor.

To fit

IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.

1. Connect the connector to the sunroof's electric motor.







2. Fit the sunroof's electric motor.

Tightening torque 3 Nm (2 ft. lbs.)

3. Fit the headlining.