B3902 70 (AMP2 - Amplifier, Rear Speakers)

B3902 70

AMP 1 or ICM Not Added






Fault Symptom
Messages shown in SID.
Audio system not functioning.

On-Board Diagnosis
Type of diagnosis:
Continuous

Enable criteria:
Ignition ON.

Fault criteria:
AMP1 not joined with ICM.

System reaction to a fault:
The immobilizer-related functions are switched OFF.

Diagnostic Help
Control module was not added.
See "Procedure after fitting the control module"

Diagnostic Help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove"