TWICE Control Module Programming

TWICE Control Module







Program the TWICE control module function Transit mode to No as follows:
- Connect the Tech 2 diagnostic tool to the data link connector under the steering wheel.
- Turn the ignition ON.
- Select Diagnostics.
- Select Model year.
- Select Vehicle type.
- Select Body.
- Select TWICE.
- Select the Adjustment menu.
- Select function Transit mode.
- Present Setting: Yes
- Desired Setting: Yes
- Select Change.
- Desired Setting: No
- Select OK.
- Delete any diagnostic trouble codes in the TWICE control module.
- Discontinue communication with the TWICE control module.
- Turn the ignition switch to the OFF position.