Suspension: Specifications

Front Suspension (Part 1 Of 3):

Tightening torques
Securing clamps, toe-in adjustment 22 Nm (16 ft. lbs.)
MacPherson strut top mounting bolts 24 Nm (18 ft. lbs.)
Steering gear retaining bolts 24 Nm (18 ft. lbs.)
MacPherson strut top mounting nut 75 Nm (55 ft. lbs.)
Tie-rod end 60 Nm (44 ft. lbs.)
Front anti-roll bar, lower nut for link arm 10 Nm (7 ft. lbs.)
Rear mounting of subframe support 100 Nm (74 ft. lbs.) + 75°
Front mounting of suspension arm to subframe 115 Nm (85 ft. lbs.)
Tightened when all four wheels are on the ground
Ball joint, steering swivel member 75 Nm (55 ft. lbs.)
Threaded ring, damper 215 Nm (159 ft. lbs.)
Support mounting to link arm 92 Nm (68 ft. lbs.)
Anti-roll bar mounting to subframe 26 Nm (19 ft. lbs.)
Subframe centre mounting to body 190 Nm (140 ft. lbs.)