FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Headlamp Dimmer Switch: Service and Repair



Dipswitch

To remove







1. Pull out the steering wheel to its outermost position.
2. Remove the steering column bearing bracket cowls (3 screws).

NOTE: Be careful when removing because there are 4 locking hooks in the lower cowl.

3. Pull out the stalk switch (2 clips).







4. Unplug the 10-pin connector.

To fit







1. Reconnect the 10 pin connector.
2. Fit the stalk switch.
3. Fit the steering column bearing bracket cowls.







4. Adjust the steering wheel to its original position.