Dimensional/Description

ABS 5.4

ABS 5.4 Hydraulic Unit Specifications

Manufacturer Bosch 5.4 ABS
Number of Solenoid Valves 8 (4 Inlet & 4 Outlet)
Return Pump Eccentric-plunger Pump
Return Pump, Maximum Pressure 250 Bar

ABS 5.4 Control module (Integrated Into Hydraulic Unit) Component:

Number of Terminal Pins 26
Power Supply, (+30 Circuit) Pin 17, 18
Power Supply, (+15 Circuit) Pin 15
Main Ground Pin 19
Working Voltage 9 - 16 Volts
Power Consumption, Brakes-Off Position < 3 mA

ABS 5.4 Front-Wheel Sensors (Component):

Operating Voltage, Minimum 120 mVAC @ 2.75 km/h
Operating Voltage, Maximum 100 VAC @ 280 km/h
Resistance 1600 ohm ± 160 @ +20°C
Number of Teeth 29
Gap, Wheel Sensor-Toothed Wheel 0.3 - 1.3 mm (Not adjustable)

ABS 5.4 Rear-Wheel Sensors (Location):

Operating Voltage, Minimum 120 mVAC @ 2.75 km/h
Operating Voltage, Maximum 100 VAC @ 280 km/h
Resistance 1130 ohm ± 115 @ +20°C
Number of Teeth 29