ABS 5.4

DTC C2485 Solenoid Valves Rear Right. Incorrect






Fault symptoms
ABS warning lamp on. ABS not functioning.

Conditions
The valves are monitored continuously for circuit continuity and short-circuiting.
The valve test starts when the ignition is switched ON and road speed is above 6 km/h.

Diagnostic help
The solenoid valves can be activated using the diagnostic tool.
- Select "Activate".
- Select "Valves"
- Select the valve from the submenu. The selected valve will be activated at a frequency of 1 Hz for about 30 s.