Rear-Seat Belts, 4D

To remove







1 Remove the C-pillar trim (fastened with clips).
2 Unscrew the lower seat-belt mounting and remove the strap guide from the C-pillar trim.
Draw the belt through the C-pillar trim.
3 Remove the upper belt mounting from the C-pillar, 2 nuts.

To fit

IMPORTANT
Ensure that the belt runs correctly.
Check that the door seals fit correctly.

Fit in reverse order.

Tightening torques:
Inertia reel mounting nuts 45 Nm (33 lbf ft).
Floor mounting 45 Nm (33 lbf ft).