Master Cylinder

To Remove
1. (LHD): Lift out the maxi fuse holder and main fuse box and unplug the connector from the anti-theft alarm switch. Remove the bracket to provide more space.
2. Remove the brake fluid reservoir.





3. Disconnect the brake lines and plug them.
4. Remove the two master cylinder retaining nuts and lift out the master cylinder.

To Fit





1. Mount the master cylinder on the brake servo unit.
2. Fit the brake lines in place.
3. (LHD): Fit the bracket, main fuse box, maxi fuse holder and anti-theft alarm switch.
4. Fit the brake fluid reservoir.
5. Bleed the brake system, refer to Brake Bleeding, Service and Repair.