Fault Conditions

P0340

Camshaft Position Sensor. Malfunction.







Fault symptoms
- CHECK ENGINE.

On-Board Diagnostics
Type of diagnosis:
- Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.

Enable criteria:
- Engine running. Main relay voltage exceeding 11 V. 1000 combustions have occurred since start.

Fault criteria:
- Ignition timing and fuel injection have not been synchronized with the camshaft position.

Dependents:
- None.

System reaction to a fault:
- None.

OK report:
- Enable criteria fulfilled. Fault criteria not fulfilled.

Fault handling: (See "Fault diagnosis, general" for more information.) Initial Inspection and Diagnostic Overview
- Type III.

Diagnostic help
First, make sure that no trouble codes have been generated that indicate a faulty fuel-air mixture. Then, check the spark plugs.

Diagnostic tool functions related to this fault are:
- Diagnostic status for the diagnosis.
- Camshaft position synchronized, ON/OFF.

See also the description of test values under "Fault diagnosis, general" for more information. Initial Inspection and Diagnostic Overview