Rear Window Wiper

Rear Window Wiper

Removal







1. Remove the wiper arm by raising the protective cover and removing the nut.
2. Open the boot and remove the lid trim.
3. Disconnect the 4-pole connector.
4. Remove the wiper motor retaining screws.
5. Remove the motor.


IMPORTANT
When changing the rear window wiper motor, move the rubber dampers from the old motor to the new one.


Refitting







1. Lift the motor into position.
2. Refit the wiper motor retaining screws.
3. Reconnect the 4-pole connector.
4. Refit the lid trim.
5. Fit the wiper arm and close the protective cover.