Horn Switch: Service and Repair

Horn Switch

To remove


WARNING
Be careful to read all the safety instructions before working on the airbag.


1. Remove the airbag.







2. Remove the four horn plate retaining screws and lift up the whole unit.


IMPORTANT
Retain the springs. They are not included in the spare part kit.


To fit







1. Fit the old springs to the new horn switch.







2. Place the horn plate on the horn switch.
3. Fit the horn plate.
Tightening torque 8 ± 1 Nm (5.86 ± 0.73 lbf ft)

4. Fit the airbag.