Control Module Inputs, Outputs, Bus For the Anti-Theft Alarm

Control module inputs for the anti-theft alarm

Control Module Inputs For The Anti-theft Alarm:

- Microswitch, driver's door (274)
- Microswitch, passenger door (435)
- Door switch, front left (54D)
- Door switch, front right (54P)
- Door switch, rear left (54RL)
- Door switch, rear right (54RR)
- Bonnet switch, anti-theft alarm (276)
- Switch, luggage compartment illumination, 3D/5D (56)
- Switch, luggage compartment illumination, convertible (56)
- Microswitch, luggage compartment lock (622)
- Glass breakage sensor (451)
- Angle sensor (457)
- Antenna, remote control, central locking system (456)
- Antenna unit, immobilizer (463)
- Ignition switch (20)
- Siren, anti-theft alarm (275)

Control module inputs for anti-theft alarm, bus







- SID buttons (Night Panel) from SID (541)
- Soft top position (UP/IN MOTION/DOWN) from STC (565)
- Diagnostics communication

For a more detailed description of the control module's input information from the bus, Bus Communication

For a further description of diagnostics, see Bus and Diagnostic communication.
See Powertrain Management/Computers and Control Systems/Information Bus.

Control module outputs for anti-theft alarm

Control Module Outputs For Anti-theft Alarm:

- Glass breakage sensor, power supply (451)
- Angle sensor, power supply (457)
- LED, anti-theft alarm (305)
- Siren, anti-theft alarm (275)
- Immobilizer antenna unit, power supply (463)

Control module outputs for anti-theft alarm, bus







- Text message used by SID (541)
- Hazard flashers (on/off) used by DICE (628)
- Diagnostics communication

For a more detailed description of the control module's input information from the bus, Bus Communication

For a further description of diagnostics, see Bus and Diagnostic communication.
See Powertrain Management/Computers and Control Systems/Information Bus.