Fault Symptom

B1332, B1333, B2332, B2333
B1332 Driver airbag. Open Circuit
B1333 Driver Airbag. Resistance too Low
B2332 Driver Airbag. Short to Ground
B2333 Driver Airbag. Short to B+







Fault symptoms
Airbag warning lamp on.

Conditions
The following conditions are applicable to the respective diagnostic trouble codes:

B1332
- The resistance measured by the control module is higher than 5.57 ohms for 10 s.
- The resistance measured by the control module is higher than 225 ohms for 160 ms.
- Fault diagnosis will not be carried out if diagnostic trouble code B2332 or B2333 has been generated.

B1333
- The resistance measured by the control module is lower than 2.02 ohms for 20 s.
- Fault diagnosis will not be carried out if diagnostic trouble code B2332 or B2333 has been generated.

B2332
- The voltage applied to control module pin 2 is lower than 1.5 V for 1.25 s.

B2333
- The voltage applied to control module pin 1 is higher than 3.5 V for 1.25 s.