Manifold Pressure/Vacuum Sensor: Service and Repair

To remove





1 Remove the engine cover.
2 Unplug the connector.
3 Undo the sensor with a 27 mm long socket.

To fit





1 Check the sealing washer and fit a new one it necessary.
Apply Vaseline (part no.30 20 271) or equivalent to the sensor threads. Fit the sensor.
Tightening torque 17 Nm (12 lbf ft)
2 Spray the connector with Kontakt 61 (part no.30 04 520). Plug in the connector.
3 Fit the cover.