Checking the Lead to Switch For Electrically Adjustable Seat

Checking The Lead To The Switch For The Electrically Adjustable Seat

















^ Connect a jumper lead between pin 1 (30) and pin 2 (87) of the relay holder.












^ Connect test lamp 86 11 857 to pins 1 and 2 of the female connector.







^ The test lamp should light.

Checking the wiring harness.
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO ^ Rectifying the Lead - VI

YES ^ Checking the Operation of the Relay