CD Changer, Option (4D)

To remove







1 Connect Tech 2.
2 Establish communication with the CD changer (CDC).
3 Select" Programming" in the system menu.
The message "Marriage/Divorce" is displayed.
4 Press" Enter key".
5 Select "DIVORCED" with the change button and press "OK".
- "DIVORCED" must be selected when removing the CD changer (to be installed in another car or to be returned for warranty repair).
6 The sound should now cease and "CDC CODE" be displayed on SID.
7 Remove the four screws holding the CD changer.
8 Unplug the connector.

To fit







1 Remove 4x transit screws (2 marked red on each side) from the new CD changer.
2 Fit the CD changer with the four screws and plug in the connector.

IMPORTANT
Check that the vertical/horizontal setting on the short side of the CD changer is in the vertical (V) position.

3 While Tech 2 is still connected and communicating, select "Programming" in the system menu. The message" Marriage/Divorce" is displayed.
4 Press" Enter Key".
5 Select "MARRIED" with the change button and press "OK".
- "MARRIED" must be selected when installing a CD changer into a Saab 9-5.
6 "CDC CODE" disappears from SID and the sound returns.


WARNING
The CD changer is a Class 1 laser product
- The CD changer should be serviced and repaired by a qualified technician only.
- If the casing of the CD changer is damaged, laser radiation can occur with a risk of injury