Engine Mounting, Right

To remove
1. Cover the wings and remove the top engine cover.





2. Fit lifting beam 83 94 850 and take up the weight of the engine via the lifting eye.
3. Detach the power steering hose from the clip under the engine mounting.
4. Remove the engine mounting.
5. Remove the engine pad.

To fit





1. Fit the engine pad.
Tightening torque 47 Nm (35 ft. lbs.).
2. Secure the power steering hose with the clip.
3. Tighten the bolts and nuts on the engine mounting to torque.
Tightening torque 47 Nm (36 ft. lbs.).
4. Lower the engine and remove the lifting beam
5. Move the engine sideways until it is balanced.
6. Tighten the engine mounting nuts.
Tightening torque 105 Nm (78 ft. lbs.)