Engine Mounting, Left

To remove





1. Drape protective covers over the wings, remove the battery cover.
2. Remove the battery and its tray.





3. Turn out the left front wheel and position Wedge 83 95 238 between the gearbox and subframe.
4. Mark the position of the engine mounting on the bracket to retain the engine's centering.
5. Remove the engine mounting.

To fit





1. Refit the engine mounting as marked but do not tighten it.
2. Remove the wedge.





3. Check that the engine is supported neutrally and tighten the engine mounting, using a torque wrench.
Tightening torque: 59 Nm (36 ft. lbs.).
4. Refit the battery and battery tray.
Set the correct time on the clock. Calibrate the ACC.