Backrest, Rear Seat Replacement

Backrest, rear seat

To remove






The 40% backrest can be removed separately. To remove the 60% backrest, the 40% backrest must first be removed.

1 Detach the upholstery hooks at the seatbelt mounting.
2 Fold up the seat cushion and fold the backrest down.






3 Undo the lock for the 40% backrest using the finger and pull the backrest up. Pull the backrest off the spindle pins.
4 Lift out the 40% backrest.
5 60% backrest:
Undo the catch for the 60% backrest using the finger and pull the backrest up.
Pull the backrest spindle pin of the centre floor mounting.
Lift out the 60% backrest.

To fit






1 60% backrest:
Lift in the 60% backrest and insert the pin in the centre floor mounting.
Press down on the outer frame of the backrest until the catch locks.
2 Lift in the 40% backrest and insert the pin into the backrest centre hinge. Press down on the outer frame of the backrest until the catch locks.

Note: Check that the centre belt runs in front of the spindle pins and backrest.






3 Re-attach the upholstery hooks at the seatbelt mounting.
4 Fold back and lock the backrest, and fold down the seat cushions.