Antenna Amplifier (4D)

To remove







1 Remove the speaker grille on the right-hand side of the parcel shelf.
2 Remove the sealing strip.
3 Remove the trim on the right-hand C pillar to gain access to the antenna amplifier.
4 Undo all connections to the antenna amplifier.







5 Remove the screws holding the antenna amplifier and remove the unit.

IMPORTANT
Be careful with the contact (4). When undoing the Fuba GO-NOGO HF contact, care is required to ensure that it is done correct without damaging the connection.

To fit
Fit in reverse order.