Resetting Activated Limp-Home Solenoid

1 Remove the engine cover.





2 Turn the ignition switch to ON.
3 Connect the diagnostic instrument and contact Trionic. Clear the diagnostic trouble codes.
4 Turn the ignition switch to OFF and wait 10 seconds.





5 Carefully push the end of the spring towards the throttle body.





6 Turn the black toothed disc anticlockwise, using a screwdriver. When it reaches the stop position a click will be heard.
7 Turn the pedal arm clockwise.
8 Check that the throttle arm does not follow the movement of the pedal arm.
9 Fit the engine cover.