Switch, Cruise Control

To remove
1 Turn the steering wheel and remove the two screws securing the steering column cover.





2 Remove the lower screw.
3 Remove the cover. Mind the hooks on the cover.
4 Unplug the connector.
5 Remove the switch.

To fit





1 Position the switch.
2 Spray the connector with kontakt 61 contact cleaner (part no.30 04 520). Plug in the connector.
3 Fit the cover. Mind the hooks on the cover.
4 Tighten the lower screw.
5 Turn the steering wheel and tit the two screws in the steering column cover.