Seat Side Panel, Upper and Lower

To remove

1 Manual front seat: Remove the height adjustment lever and the backrest adjustment knob.


NOTE: When removing the adjustment knob the backrest rake axle can come out with the knob.







2 Remove the upper seat side panel, 2 covers and 3 screws. Lift the side panel at the back and pull forward.
3 Electrically adjustable front seat: Unplug the connector from the switch and memory buttons, it any.







4 Remove the lower seat side panel, 2 screws.







To fit
Fit in reverse order.


NOTE: If required, removing the backrest upholstery can make it easier to position the backrest rake axle. Check that the backrest upholstery is not pinched between the side cover and the backrest. The upholstery should lie over the axle.