Final Check, Fuel Fault - II

Final Check Fuel Fault Continued









- Turn the ignition switch to the OFF position.

Plug in the connector.
- EVAP canister purge valve
- Drive the car at a speed of 60-100 km/h with a steady throttle opening and the engine running at 1500-2750 rpm.
- Wait until the value is fully stabilized.

Test value:
Multiplicative Adaptation
- State what the diagnostic tool shows:

-15% to -25% - The steps taken to rectify the fault were correct.
Other value - See 'Before changing a control module'. Before Changing A Control Module