Headlamp Motor: Service and Repair

Headlamp Beam-Length Adjustment Motor

To remove





1 Remove the direction indicator, see Turn Signals/Service and Repair. Remove the headlamp, see Headlamp/Service and Repair.
2 Turn the motor approx. 45° and pull it straight out with medium force.

To fit





1 Remove the cover
2 Lift up the reflector and press the motor shaft down into the groove.
3 Press in the motor and turn it approx. 45° to fasten it.
4 Fit the headlamp, see Headlamp/Service and Repair.
5 Fit the direction indicator, see Turn Signals/Service and Repair.