Speaker, Luggage Compartment (5D)

To remove







1 Fold down the right-hand rear seat backrest and remove the side bolster between the rear right door and the backrest.
2 Lift out the concealing panel.
3 Remove the right-hand storage compartment in the floor.







4 Remove the scuff plate by first removing the covers on the right and left-hand sides. Undo the screws securing the scuff plate to the sill. Pull off the scuff plate, it is fastened with clips.
5 Remove the rear roof cover and unplug the connections for the lighting.







6 Remove the right-hand D-pillar trim and the right-hand concealing panel support (3 screws).
7 Remove the five screws in the top of the right-hand side trim and lift out the trim.







8 Remove the bass speaker and unplug the connector.







To fit







1 Plug in the connector to the bass speaker and fit the speaker.
2 Position the side trim and tighten the five screws at the top.







3 Refit the concealing panel support (3 screws) and the D-pillar trim.







4 Fit the rear roof cover and plug in the lighting.
5 Press in the scuff plate clips and screw on the scuff plate. Fit the covers over the screws and position the sealing strip over the scuff plate.







6 Fit the storage compartment in the floor.
7 Lift in the concealing panel.
8 Fit the side bolster between the rear right door and the backrest and fold up the rear seat backrest.