Checking the Switch's Power Supply

Checking The Switch's Power Supply







Unplug the connector:
- Ventilation fan switch (35)







- Turn the ignition switch to the ON position.












- Connect a test lamp to pin 2 of the female connector and a good grounding point.







- The lamp should light.

Checking The Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead - I

YES - Checking the Fan's Ground Connection