Check Brake Pedal Switch

Check Brake Pedal Switch







- Depress the brake pedal.












Take a resistance reading between
- 1 - Brake pedal switch, cruise control
- 2 - Brake pedal switch, cruise control

The reading should be 0 Ohm - 1 Ohm

Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Changing Components - II

YES - Rectifying the Lead - II