Checking the Electric Antenna Power Supply

Checking The Electric Antenna Power Supply







Unplug the connector:
- Electrically operated radio antenna (365)







- Switch on the main unit.

















- Connect a test lamp to pin 2 of the female connector and a good grounding point.







- The test lamp should light.

Checking the wiring harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead - I

YES - Electric Antenna Trigger Voltage With Respect to A Short to B+