Gearbox Warning Lamp

Part 1 Of 2





Part 2 Of 2

Fault symptoms
The lamp does not go on or is on constantly. Note that the CHECK GEARBOX warning lamp undergoes a function test for seconds when the ignition key is turned to the ON position.

Diagnostic procedure





1. Check the lamp
- Connect a diagnostic tool.
- Select "Activate"
- Select "Check gearbox lamp".

Does the lamp work?

YES
Rectify the relevant lead and continue with step 2.

NO
Change the bulb, refer to Instrument Panel, Gauges and Warning Indicators.
Continue with step 2

2. Final check
- Clear all diagnostic trouble codes in the system.
- Perform a check of functionality.

All OK?
YES
The steps taken to rectify the fault were correct.

NO
Proceed with Before changing a control module.