Horn Switch: Service and Repair

To remove


WARNING
Be careful to read all the safety instructions before working on the airbag


1 Remove the airbag, see "SRS, Airbag".







2 Remove the four horn plate retaining screws and lift up the whole unit.


IMPORTANT
Retain the springs. They are not included in the spare part kit.


To fit







1 Fit the old springs to the new horn switch.







2 Place the horn plate on the horn switch.
3 Fit the horn plate.
Tightening torque 8 ± 1 Nm (5.86 ± 0.73 lbf ft)
4 Fir the airbag, see "SRS, Airbag".