Check Pedal Switch and Gear Position Sensor - III

Check Pedal Switch and Gear Position Sensor

















Unplug the connector.
- H10-1







- Connect a jumper between pins 3 and 8







- The test lamp should light.

Checking the Wiring Harness
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Checking the Gear Selector Position Sensor's Power Supply

YES - Checking the Adjustment of the Gear Selector Position Sensor